Electrical hazards: The installation of fiber optic cables normally does not involve any electrical risk, unless the cable includes conductors. However, fiber optic cables are usually installed near electrical cables and conductors. When you are near these cables, there is always a potential danger of electric shock. Be careful! If you are not familiar with electrical safety, we recommend taking a
course in the National Electricity Code (NEC), and safe practices for installers!
Safety standards in the installation of fiber optic
All this is very important, so important that you have to have some standards for the workplace for
all fiber optic technicians, who can avoid accidents there:
· Work on a black surface to help find the remains of fiber.
· Wear disposable aprons to minimize the number of fiber particles in your clothes. The
particles in the clothing can then be transferred to food, drink and / or ingested in another way.
· Always wear safety glasses with side shields and protective gloves. Fiber optic chips should
be treated the same way you would treat glass fibers.
· Never look directly inside the fiber cables until you are sure that there is no light source
at the other end. Use an optical power meter to make sure the fiber is dark fiber. When using an
optical locator or continuity checker, view the fiber from an angle at least 15.24 centimeters away
from the eye to determine if there is visible light.
· Only work in well-ventilated areas.
· Those who wear contact lenses should not manipulate their lenses until they have washed their
hands carefully.
· Do not touch your eyes when working with fiber optic systems until hands have been carefully
washed.
· All combustible materials should be kept away from electrical devices, including splicers,
verifiers and affordable furnaces.
· All pieces of cut fibers should be placed in a container properly labeled as waste.
· Thoroughly clean the entire work area once it is finished.
· No smoking while working with fiber optic systems.
· All meals and drinks outside the work area should be kept. If the fiber particles are
ingested, they can cause internal bleeding.
Also Read: Fiber technician salary
course in the National Electricity Code (NEC), and safe practices for installers!
Safety standards in the installation of fiber optic
All this is very important, so important that you have to have some standards for the workplace for
all fiber optic technicians, who can avoid accidents there:
· Work on a black surface to help find the remains of fiber.
· Wear disposable aprons to minimize the number of fiber particles in your clothes. The
particles in the clothing can then be transferred to food, drink and / or ingested in another way.
· Always wear safety glasses with side shields and protective gloves. Fiber optic chips should
be treated the same way you would treat glass fibers.
· Never look directly inside the fiber cables until you are sure that there is no light source
at the other end. Use an optical power meter to make sure the fiber is dark fiber. When using an
optical locator or continuity checker, view the fiber from an angle at least 15.24 centimeters away
from the eye to determine if there is visible light.
· Only work in well-ventilated areas.
· Those who wear contact lenses should not manipulate their lenses until they have washed their
hands carefully.
· Do not touch your eyes when working with fiber optic systems until hands have been carefully
washed.
· All combustible materials should be kept away from electrical devices, including splicers,
verifiers and affordable furnaces.
· All pieces of cut fibers should be placed in a container properly labeled as waste.
· Thoroughly clean the entire work area once it is finished.
· No smoking while working with fiber optic systems.
· All meals and drinks outside the work area should be kept. If the fiber particles are
ingested, they can cause internal bleeding.
Also Read: Fiber technician salary
No comments:
Post a Comment