We supply 10 100Base Fiber Optic Media Converter both dual fiber type and single fiber type. these 10 100 media converter are economic and convenient to use as copper to fiber devices in 10 100 Ethernet. The 10/100base dual fiber converters have single mode type and multimode type, they are the most commonly used converters and they are cheap. The 10/100base single fiber converters have only single mode type and this converter use WDM technology to transmit and receive signal via the same optical fiber.

The 10 100Base Fiber Optic Media Converter transforms the transmission media of Ethernet signal from CAT5 to optical fiber. It can extend the transmission distance to several kilometers or hundred kilometers. Using 10 100Base Fiber Optic Media Converter is an economical solution to achieve long distance transmission base on current status.
cfot certification
10 100Base Fiber Optic Media Converter features
1.Built in a 2-port switch:
--Pass all packets without address and CRC check (optional);
--Supports modified cut-through frame forwarding for low latency;
--Supports pure converter mode data forwarding for extreme low latency;
--Supports flow control for full and halt duplex operation;
--Bandwidth control;
--Forward 1600 bytes packet for management;
--Optional forward fragments.
2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. The longest transmission distance reach 120 kilometers;

10 100Base Fiber Optic Media Converter standard
IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD